Features:

1. Men and women share

2. For Women

3. Massage wash

4. Water pressure adjustable

5. Adjustable water temperature

6. Nozzle washing

 Model Specifications:

Installation Methods	Installation Methods
Make sure the following accessories before installation 1. Each one hot and cold water inlet pipe. 2. Screw 2 sets. 3. Three 2 (with quick coupling). 4. Fixed nut rotating sleeve 1. 1. Fixed-install the bolt corresponding to under the toilet hole distance, determine the method by which to install (for pitch for the 140mm-180mm in the toilet). 2. Fixed-install bolt after adjusting its installed in the toilet, fitted with rubber pads and a fixed nut and rotate the sleeve with the retaining nut to tighten.	1. Fixed-install the bolt corresponding to under the toilet hole distance, determine the method by which to install (for pitch for the 140mm-180mm in the toilet). 2. Fixed-install bolt after adjusting its installed in the toilet, fitted with rubber pads and a fixed nut and rotate the sleeve with the retaining nut to tighten.

Use

1. Handle:adjusting water pressure, press the handle began to flush, release the handle nozzle automatically reset to stop working, the water temperature is about to turn the handle can be adjusted.

2. Pressure regulator:turning the wheel pressure of the situation under control to adjust water pressure and personal, set up after each use without further in the regulation.

3. Function select button:choose according to individual needs, clean, wash or two female feature simultaneously.

4. Anal cleaning nozzle:spray nozzle from a strong private jet of water to thoroughly cleanse the skin deep anal fold, to keep the anus clean.

5. Women cleaning nozzle:The nozzle is designed specifically for women washing, and because of their point of view of science, so that women wash cleaner than other products.

6. Massage effect:pull handle up and down massage effect can be achieved, and to promote blood circulation, so that the cleaning process more comfortable, can relieve constipation and hemorrhoids.

Hot and cold water pipe installation and connection 

1. The bottom of the hot water into the wash basin and cold water supply pipe (or the toilet back into the water) Department of angle valve closed.

2. The original pipes were connected to three links removed, then the original water and links to connect.

3. And then were cold, hot water pipes will Bidet connected with the corresponding links, the connection will be forced into pipe joints can be quickly inserted.

4. Respectively, the Angle will be closed to open to use.